dmesg - 2011-05-31 18:42
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@allspice) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000330000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H/GA-890GPA-UD3H, BIOS FD 07/23/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x330000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFF00000000 write-back
[ 0.000000] 5 base 000200000000 mask FFFF00000000 write-back
[ 0.000000] 6 base 000300000000 mask FFFFE0000000 write-back
[ 0.000000] 7 base 000320000000 mask FFFFF0000000 write-back
[ 0.000000] TOM2: 0000000330000000 aka 13056M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f44d0] f44d0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfdf0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfdf0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000330000000
[ 0.000000] 0100000000 - 0300000000 page 1G
[ 0.000000] 0300000000 - 0330000000 page 2M
[ 0.000000] kernel direct mapping tables up to 330000000 @ cfdee000-cfdf0000
[ 0.000000] RAMDISK: 366e0000 - 37368000
[ 0.000000] ACPI: RSDP 00000000000f5e70 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdf1000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdf1040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdf10c0 076BC (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfdf0000 00040
[ 0.000000] ACPI: SSDT 00000000cfdf8840 00EDC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfdf9740 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdf9780 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdf97c0 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: APIC 00000000cfdf8780 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000330000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000330000000
[ 0.000000] NODE_DATA [000000032fffb000 - 000000032fffffff]
[ 0.000000] [ffffea0000000000-ffffea000b3fffff] PMD -> [ffff880323e00000-ffff88032e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00330000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfdf0
[ 0.000000] 0: 0x00100000 -> 0x00330000
[ 0.000000] On node 0 totalpages: 3145087
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833064 pages, LIFO batch:31
[ 0.000000] Normal zone: 31360 pages used for memmap
[ 0.000000] Normal zone: 2262400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfa00000 s84416 r8192 d22080 u262144
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3099385
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 3f6000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 12247436k/13369344k available (5940k kernel code, 788996k absent, 332912k reserved, 5017k data, 956k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 125829120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3314.602 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.20 BogoMIPS (lpj=33146020)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000026] Security Framework initialized
[ 0.000037] AppArmor: AppArmor initialized
[ 0.000039] Yama: becoming mindful.
[ 0.000979] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014150] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.016280] Mount-cache hash table entries: 256
[ 0.016380] Initializing cgroup subsys ns
[ 0.016383] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.016387] Initializing cgroup subsys cpuacct
[ 0.016391] Initializing cgroup subsys memory
[ 0.016398] Initializing cgroup subsys devices
[ 0.016401] Initializing cgroup subsys freezer
[ 0.016404] Initializing cgroup subsys net_cls
[ 0.016406] Initializing cgroup subsys blkio
[ 0.016429] tseg: 00cff00000
[ 0.016431] CPU: Physical Processor ID: 0
[ 0.016433] CPU: Processor Core ID: 0
[ 0.016435] mce: CPU supports 6 MCE banks
[ 0.016443] using C1E aware idle routine
[ 0.017507] ACPI: Core revision 20110112
[ 0.020028] ftrace: allocating 24314 entries in 96 pages
[ 0.030066] Setting APIC routing to flat
[ 0.030446] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.132580] CPU0: AMD Phenom(tm) II X6 1100T Processor stepping 00
[ 0.140000] Performance Events: AMD PMU driver.
[ 0.140000] ... version: 0
[ 0.140000] ... bit width: 48
[ 0.140000] ... generic registers: 4
[ 0.140000] ... value mask: 0000ffffffffffff
[ 0.140000] ... max period: 00007fffffffffff
[ 0.140000] ... fixed-purpose events: 0
[ 0.140000] ... event mask: 000000000000000f
[ 0.140000] Booting Node 0, Processors #1
[ 0.300012] System has AMD C1E enabled
[ 0.300028] Switch to broadcast mode on CPU1
[ 0.300047] #2
[ 0.470014] Switch to broadcast mode on CPU2
[ 0.470053] #3
[ 0.640029] Switch to broadcast mode on CPU3
[ 0.640069] #4
[ 0.810026] Switch to broadcast mode on CPU4
[ 0.810075] #5
[ 0.980030] Brought up 6 CPUs
[ 0.980041] Total of 6 processors activated (39776.19 BogoMIPS).
[ 0.980026] Switch to broadcast mode on CPU5
[ 0.982935] Switch to broadcast mode on CPU0
[ 0.982935] devtmpfs: initialized
[ 0.982935] print_constraints: dummy:
[ 0.982935] Time: 18:08:19 Date: 05/31/11
[ 0.982935] NET: Registered protocol family 16
[ 0.982935] node 0 link 0: io port [a000, ffff]
[ 0.982935] TOM: 00000000d0000000 aka 3328M
[ 0.982935] Fam 10h mmconf [e0000000, e00fffff]
[ 0.982935] node 0 link 0: mmio [a0000, bffff]
[ 0.982935] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.982935] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.982935] node 0 link 0: mmio [e0000000, e05fffff] ==> [e0100000, e05fffff]
[ 0.982935] TOM2: 0000000330000000 aka 13056M
[ 0.982935] bus: [00, 05] on node 0 link 0
[ 0.982935] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.982935] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.982935] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.982935] bus: 00 index 3 [mem 0xe0600000-0xffffffff]
[ 0.982935] bus: 00 index 4 [mem 0xe0100000-0xe05fffff]
[ 0.982935] bus: 00 index 5 [mem 0x330000000-0xfcffffffff]
[ 0.982935] Extended Config Space enabled on 1 nodes
[ 0.982935] ACPI: bus type pci registered
[ 0.982935] Trying to unpack rootfs image as initramfs...
[ 0.982935] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.982935] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.998226] PCI: Using configuration type 1 for base access
[ 0.998625] bio: create slab at 0
[ 0.998625] ACPI: EC: Look up EC in DSDT
[ 1.000422] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.000427]
[ 1.000431] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.000435]
[ 1.000458] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.000461]
[ 1.000465] ACPI: Actual Package length (1) is larger than NumElements field (0), truncated
[ 1.000469]
[ 1.003974] ACPI: Interpreter enabled
[ 1.003981] ACPI: (supports S0 S3 S4 S5)
[ 1.003996] ACPI: Using IOAPIC for interrupt routing
[ 1.127032] Freeing initrd memory: 12832k freed
[ 1.271445] ACPI: No dock devices found.
[ 1.271450] HEST: Table not found.
[ 1.271453] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.271492] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.271561] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.271565] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.271567] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.271570] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 1.271573] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 1.271586] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
[ 1.271595] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 1.271622] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[ 1.271642] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.271644] pci 0000:00:02.0: PME# disabled
[ 1.271656] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 1.271675] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.271677] pci 0000:00:05.0: PME# disabled
[ 1.271690] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[ 1.271709] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 1.271711] pci 0000:00:0a.0: PME# disabled
[ 1.271731] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 1.271746] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 1.271753] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 1.271760] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 1.271766] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 1.271773] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 1.271779] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 1.271793] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.271826] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 1.271835] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 1.271884] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 1.271897] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
[ 1.271946] pci 0000:00:12.2: supports D1 D2
[ 1.271947] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.271949] pci 0000:00:12.2: PME# disabled
[ 1.271964] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 1.271973] pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 1.272023] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 1.272036] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff]
[ 1.272084] pci 0000:00:13.2: supports D1 D2
[ 1.272085] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.272088] pci 0000:00:13.2: PME# disabled
[ 1.272102] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 1.272152] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 1.272161] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 1.272168] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 1.272174] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 1.272181] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 1.272188] pci 0000:00:14.1: reg 20: [io 0xfa00-0xfa0f]
[ 1.272213] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 1.272228] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
[ 1.272267] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.272270] pci 0000:00:14.2: PME# disabled
[ 1.272279] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 1.272331] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 1.272359] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 1.272368] pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 1.272415] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 1.272453] pci 0000:00:15.0: supports D1 D2
[ 1.272473] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 1.272483] pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff]
[ 1.272531] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 1.272544] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff]
[ 1.272593] pci 0000:00:16.2: supports D1 D2
[ 1.272594] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 1.272596] pci 0000:00:16.2: PME# disabled
[ 1.272610] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 1.272620] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 1.272629] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 1.272638] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 1.272648] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 1.272685] pci 0000:01:00.0: [1002:68d9] type 0 class 0x000300
[ 1.272696] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.272704] pci 0000:01:00.0: reg 18: [mem 0xfdec0000-0xfdedffff 64bit]
[ 1.272710] pci 0000:01:00.0: reg 20: [io 0xee00-0xeeff]
[ 1.272720] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.272734] pci 0000:01:00.0: supports D1 D2
[ 1.272750] pci 0000:01:00.1: [1002:aa60] type 0 class 0x000403
[ 1.272760] pci 0000:01:00.1: reg 10: [mem 0xfdefc000-0xfdefffff 64bit]
[ 1.272796] pci 0000:01:00.1: supports D1 D2
[ 1.290020] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.290027] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.290029] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.290032] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.290066] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 1.290081] pci 0000:02:00.0: reg 10: [mem 0xfdbfe000-0xfdbfffff 64bit]
[ 1.290137] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.290140] pci 0000:02:00.0: PME# disabled
[ 1.310020] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.310027] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 1.310029] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.310031] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.310065] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200
[ 1.310077] pci 0000:03:00.0: reg 10: [io 0xce00-0xceff]
[ 1.310096] pci 0000:03:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 1.310108] pci 0000:03:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 1.310117] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 1.310145] pci 0000:03:00.0: supports D1 D2
[ 1.310146] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.310149] pci 0000:03:00.0: PME# disabled
[ 1.330025] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.330031] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.330033] pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.330036] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.330075] pci 0000:04:0e.0: [104c:8024] type 0 class 0x000c00
[ 1.330093] pci 0000:04:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
[ 1.330103] pci 0000:04:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
[ 1.330169] pci 0000:04:0e.0: supports D1 D2
[ 1.330170] pci 0000:04:0e.0: PME# supported from D0 D1 D2 D3hot
[ 1.330174] pci 0000:04:0e.0: PME# disabled
[ 1.330201] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
[ 1.330206] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.330209] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.330212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 1.330213] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.330215] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.330217] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.330218] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 1.330220] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 1.330268] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 1.330348] pci 0000:05:00.0: reg 24: [mem 0xfdafe000-0xfdafffff]
[ 1.330387] pci 0000:05:00.0: PME# supported from D3hot
[ 1.330391] pci 0000:05:00.0: PME# disabled
[ 1.330417] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 1.330438] pci 0000:05:00.1: reg 10: [io 0xaf00-0xaf07]
[ 1.330455] pci 0000:05:00.1: reg 14: [io 0xae00-0xae03]
[ 1.330466] pci 0000:05:00.1: reg 18: [io 0xad00-0xad07]
[ 1.330478] pci 0000:05:00.1: reg 1c: [io 0xac00-0xac03]
[ 1.330490] pci 0000:05:00.1: reg 20: [io 0xab00-0xab0f]
[ 1.330552] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.330565] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.330570] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.330572] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.330576] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.330590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.330748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.330771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 1.330803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 1.330821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 1.330839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 1.330857] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.337280] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337307] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337331] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337355] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337378] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337401] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337425] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337448] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 1.337518] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.337522] vgaarb: loaded
[ 1.337620] SCSI subsystem initialized
[ 1.337640] libata version 3.00 loaded.
[ 1.337640] usbcore: registered new interface driver usbfs
[ 1.337640] usbcore: registered new interface driver hub
[ 1.337640] usbcore: registered new device driver usb
[ 1.337640] wmi: Mapper loaded
[ 1.337640] PCI: Using ACPI for IRQ routing
[ 1.337640] PCI: pci_cache_line_size set to 64 bytes
[ 1.337640] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 1.337640] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 1.337640] reserve RAM buffer: 00000000cfdf0000 - 00000000cfffffff
[ 1.337640] NetLabel: Initializing
[ 1.337640] NetLabel: domain hash size = 128
[ 1.337640] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.337640] NetLabel: unlabeled traffic allowed by default
[ 1.337640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.337640] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.340017] Switching to clocksource hpet
[ 1.343918] AppArmor: AppArmor Filesystem Enabled
[ 1.343934] pnp: PnP ACPI init
[ 1.343946] ACPI: bus type pnp registered
[ 1.344002] pnp 00:00: [bus 00-ff]
[ 1.344004] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.344005] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.344007] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.344008] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.344009] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 1.344011] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 1.344038] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.344044] pnp 00:01: [io 0x0010-0x001f]
[ 1.344045] pnp 00:01: [io 0x0022-0x003f]
[ 1.344046] pnp 00:01: [io 0x0044-0x005f]
[ 1.344047] pnp 00:01: [io 0x0062-0x0063]
[ 1.344048] pnp 00:01: [io 0x0065-0x006f]
[ 1.344050] pnp 00:01: [io 0x0074-0x007f]
[ 1.344051] pnp 00:01: [io 0x0091-0x0093]
[ 1.344052] pnp 00:01: [io 0x00a2-0x00bf]
[ 1.344053] pnp 00:01: [io 0x00e0-0x00ef]
[ 1.344054] pnp 00:01: [io 0x04d0-0x04d1]
[ 1.344055] pnp 00:01: [io 0x0220-0x0225]
[ 1.344056] pnp 00:01: [io 0x0290-0x0294]
[ 1.344092] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 1.344095] system 00:01: [io 0x0220-0x0225] has been reserved
[ 1.344098] system 00:01: [io 0x0290-0x0294] has been reserved
[ 1.344101] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.349912] Switched to NOHz mode on CPU #5
[ 1.349917] Switched to NOHz mode on CPU #1
[ 1.349920] Switched to NOHz mode on CPU #2
[ 1.349925] Switched to NOHz mode on CPU #0
[ 1.349929] Switched to NOHz mode on CPU #3
[ 1.349931] Switched to NOHz mode on CPU #4
[ 1.350259] pnp 00:02: [io 0x4100-0x411f]
[ 1.350261] pnp 00:02: [io 0x0228-0x022f]
[ 1.350262] pnp 00:02: [io 0x040b]
[ 1.350263] pnp 00:02: [io 0x04d6]
[ 1.350264] pnp 00:02: [io 0x0c00-0x0c01]
[ 1.350265] pnp 00:02: [io 0x0c14]
[ 1.350266] pnp 00:02: [io 0x0c50-0x0c52]
[ 1.350267] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 1.350268] pnp 00:02: [io 0x0c6f]
[ 1.350269] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 1.350270] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 1.350272] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 1.350273] pnp 00:02: [io 0x4000-0x40fe]
[ 1.350274] pnp 00:02: [io 0x4210-0x4217]
[ 1.350275] pnp 00:02: [io 0x0b00-0x0b0f]
[ 1.350276] pnp 00:02: [io 0x0b10-0x0b1f]
[ 1.350277] pnp 00:02: [io 0x0b20-0x0b3f]
[ 1.350278] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 1.350280] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 1.350284] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350308] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.350316] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:03:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 1.350349] system 00:02: [io 0x4100-0x411f] has been reserved
[ 1.350352] system 00:02: [io 0x0228-0x022f] has been reserved
[ 1.350355] system 00:02: [io 0x040b] has been reserved
[ 1.350358] system 00:02: [io 0x04d6] has been reserved
[ 1.350361] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 1.350364] system 00:02: [io 0x0c14] has been reserved
[ 1.350366] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 1.350369] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 1.350372] system 00:02: [io 0x0c6f] has been reserved
[ 1.350375] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 1.350378] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 1.350382] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 1.350385] system 00:02: [io 0x4000-0x40fe] has been reserved
[ 1.350388] system 00:02: [io 0x4210-0x4217] has been reserved
[ 1.350391] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 1.350394] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 1.350397] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 1.350400] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 1.350404] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.350465] pnp 00:03: [dma 4]
[ 1.350466] pnp 00:03: [io 0x0000-0x000f]
[ 1.350467] pnp 00:03: [io 0x0080-0x0090]
[ 1.350469] pnp 00:03: [io 0x0094-0x009f]
[ 1.350470] pnp 00:03: [io 0x00c0-0x00df]
[ 1.350492] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.350520] pnp 00:04: [io 0x0070-0x0073]
[ 1.350530] pnp 00:04: [irq 8]
[ 1.350546] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.350551] pnp 00:05: [io 0x0061]
[ 1.350566] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.350570] pnp 00:06: [io 0x00f0-0x00ff]
[ 1.350575] pnp 00:06: [irq 13]
[ 1.350592] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.350757] pnp 00:07: [io 0x03f8-0x03ff]
[ 1.350762] pnp 00:07: [irq 4]
[ 1.350795] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.350826] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 1.350858] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.350862] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.350936] pnp 00:09: [mem 0x000f0000-0x000f3fff]
[ 1.350937] pnp 00:09: [mem 0x000f4000-0x000f7fff]
[ 1.350940] pnp 00:09: [mem 0x000f8000-0x000fbfff]
[ 1.350941] pnp 00:09: [mem 0x000fc000-0x000fffff]
[ 1.350942] pnp 00:09: [mem 0xcfdf0000-0xcfdfffff]
[ 1.350943] pnp 00:09: [mem 0xffff0000-0xffffffff]
[ 1.350945] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 1.350946] pnp 00:09: [mem 0x00100000-0xcfdeffff]
[ 1.350947] pnp 00:09: [mem 0xcfe00000-0xcfefffff]
[ 1.350948] pnp 00:09: [mem 0xcff00000-0xcfffffff]
[ 1.350949] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.350951] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 1.350952] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 1.350953] pnp 00:09: [mem 0xfff80000-0xfffeffff]
[ 1.350956] pnp 00:09: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350960] pnp 00:09: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350965] pnp 00:09: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350969] pnp 00:09: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350974] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.350978] pnp 00:09: disabling [mem 0x00100000-0xcfdeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 1.351024] system 00:09: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
[ 1.351027] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
[ 1.351030] system 00:09: [mem 0xcfe00000-0xcfefffff] has been reserved
[ 1.351033] system 00:09: [mem 0xcff00000-0xcfffffff] could not be reserved
[ 1.351036] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.351039] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 1.351042] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
[ 1.351045] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.351057] pnp: PnP ACPI: found 10 devices
[ 1.351059] ACPI: ACPI bus type pnp unregistered
[ 1.356477] pci 0000:01:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 1.356481] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 1.356484] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.356488] pci 0000:00:02.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 1.356491] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.356495] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 1.356498] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 1.356501] pci 0000:00:05.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 1.356504] pci 0000:00:05.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.356509] pci 0000:03:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
[ 1.356512] pci 0000:00:0a.0: PCI bridge to [bus 03-03]
[ 1.356514] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
[ 1.356517] pci 0000:00:0a.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 1.356521] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.356525] pci 0000:00:14.4: PCI bridge to [bus 04-04]
[ 1.356528] pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
[ 1.356532] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
[ 1.356536] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
[ 1.356543] pci 0000:00:15.0: PCI bridge to [bus 05-05]
[ 1.356545] pci 0000:00:15.0: bridge window [io 0xa000-0xafff]
[ 1.356550] pci 0000:00:15.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 1.356553] pci 0000:00:15.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.356569] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.356573] pci 0000:00:02.0: setting latency timer to 64
[ 1.356580] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.356584] pci 0000:00:05.0: setting latency timer to 64
[ 1.356587] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.356590] pci 0000:00:0a.0: setting latency timer to 64
[ 1.356596] pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.356600] pci 0000:00:15.0: setting latency timer to 64
[ 1.356602] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.356604] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.356605] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.356606] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.356608] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff]
[ 1.356609] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.356610] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 1.356612] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 1.356613] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.356615] pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 1.356616] pci_bus 0000:02: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 1.356617] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 1.356619] pci_bus 0000:03: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 1.356620] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.356621] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 1.356623] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 1.356624] pci_bus 0000:04: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
[ 1.356625] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.356627] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.356628] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.356629] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 1.356630] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xfebfffff]
[ 1.356632] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 1.356633] pci_bus 0000:05: resource 1 [mem 0xfda00000-0xfdafffff]
[ 1.356634] pci_bus 0000:05: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
[ 1.356656] NET: Registered protocol family 2
[ 1.356908] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.358445] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.360746] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.361027] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.361030] TCP reno registered
[ 1.361047] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.361139] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.361291] NET: Registered protocol family 1
[ 1.440166] pci 0000:01:00.0: Boot video device
[ 1.440205] PCI: CLS 4 bytes, default 64
[ 1.441551] PCI-DMA: Disabling AGP.
[ 1.441663] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 1.441666] PCI-DMA: using GART IOMMU.
[ 1.441669] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.444831] audit: initializing netlink socket (disabled)
[ 1.444847] type=2000 audit(1306865299.440:1): initialized
[ 1.453037] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.454115] VFS: Disk quotas dquot_6.5.2
[ 1.454145] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.454554] fuse init (API version 7.16)
[ 1.454601] msgmni has been set to 24074
[ 1.454821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.454850] io scheduler noop registered
[ 1.454852] io scheduler deadline registered
[ 1.454874] io scheduler cfq registered (default)
[ 1.454992] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.455020] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.455100] pcieport 0000:00:05.0: setting latency timer to 64
[ 1.455117] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 1.455182] pcieport 0000:00:0a.0: setting latency timer to 64
[ 1.455200] pcieport 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 1.455316] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.455332] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.455417] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.455423] ACPI: Power Button [PWRB]
[ 1.455455] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.455459] ACPI: Power Button [PWRF]
[ 1.455573] ACPI: acpi_idle registered with cpuidle
[ 1.455584] ACPI: processor limited to max C-state 1
[ 1.720573] ERST: Table is not found!
[ 1.741122] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.010667] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.010830] Linux agpgart interface v0.103
[ 2.011425] brd: module loaded
[ 2.011689] loop: module loaded
[ 2.011740] i2c-core: driver [adp5520] using legacy suspend method
[ 2.011742] i2c-core: driver [adp5520] using legacy resume method
[ 2.011879] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.011980] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
[ 2.011986] pata_acpi 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.012003] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 2.012011] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 2.012276] Fixed MDIO Bus: probed
[ 2.012297] PPP generic driver version 2.4.2
[ 2.012332] tun: Universal TUN/TAP device driver, 1.6
[ 2.012335] tun: (C) 1999-2004 Max Krasnyansky
[ 2.012391] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.012482] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.012520] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 2.012556] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.060100] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.060106] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.060126] ehci_hcd 0000:00:12.2: debug port 1
[ 2.060152] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000
[ 2.080089] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.080173] hub 1-0:1.0: USB hub found
[ 2.080177] hub 1-0:1.0: 5 ports detected
[ 2.080300] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.080312] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.080336] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 2.110109] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.110115] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.110135] ehci_hcd 0000:00:13.2: debug port 1
[ 2.110146] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000
[ 2.130083] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.130159] hub 2-0:1.0: USB hub found
[ 2.130162] hub 2-0:1.0: 5 ports detected
[ 2.130292] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.130304] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 2.130329] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 2.130358] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM
[ 2.130362] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.130379] ehci_hcd 0000:00:16.2: debug port 1
[ 2.130390] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000
[ 2.150083] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.150158] hub 3-0:1.0: USB hub found
[ 2.150161] hub 3-0:1.0: 4 ports detected
[ 2.150229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.150306] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.150320] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.150346] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 2.150388] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000
[ 2.214149] hub 4-0:1.0: USB hub found
[ 2.214155] hub 4-0:1.0: 5 ports detected
[ 2.214312] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.214324] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.214350] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.214382] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000
[ 2.274156] hub 5-0:1.0: USB hub found
[ 2.274162] hub 5-0:1.0: 5 ports detected
[ 2.274321] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.274333] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.274359] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 2.274393] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000
[ 2.334154] hub 6-0:1.0: USB hub found
[ 2.334160] hub 6-0:1.0: 2 ports detected
[ 2.334313] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.334325] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.334349] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 2.350115] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000
[ 2.414159] hub 7-0:1.0: USB hub found
[ 2.414165] hub 7-0:1.0: 4 ports detected
[ 2.414248] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.414306] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.448114] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 2.448117] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 2.448181] Refined TSC clocksource calibration: 3314.681 MHz.
[ 2.448184] Switching to clocksource tsc
[ 2.690157] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.690228] mousedev: PS/2 mouse device common for all mice
[ 2.690301] rtc_cmos 00:04: RTC can wake from S4
[ 2.690378] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.690406] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.690464] device-mapper: uevent: version 1.0.3
[ 2.690511] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
[ 2.690591] device-mapper: multipath: version 1.2.0 loaded
[ 2.690594] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.690667] cpuidle: using governor ladder
[ 2.690669] cpuidle: using governor menu
[ 2.690802] TCP cubic registered
[ 2.690866] NET: Registered protocol family 10
[ 2.691159] NET: Registered protocol family 17
[ 2.691170] Registering the dns_resolver key type
[ 2.691245] powernow-k8: Found 1 AMD Phenom(tm) II X6 1100T Processor (6 cpu cores) (version 2.20.00)
[ 2.691254] powernow-k8: Core Performance Boosting: on.
[ 2.691279] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 2.691281] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 2.691283] powernow-k8: 2 : pstate 2 (1700 MHz)
[ 2.691286] powernow-k8: 3 : pstate 3 (800 MHz)
[ 2.691697] PM: Hibernation image not present or could not be loaded.
[ 2.691703] registered taskstats version 1
[ 2.691946] Magic number: 11:298:141
[ 2.691954] block ram6: hash matches
[ 2.691977] acpi device:12: hash matches
[ 2.692039] rtc_cmos 00:04: setting system clock to 2011-05-31 18:08:21 UTC (1306865301)
[ 2.692043] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.692046] EDD information not available.
[ 2.693103] Freeing unused kernel memory: 956k freed
[ 2.693278] Write protecting the kernel read-only data: 10240k
[ 2.693869] Freeing unused kernel memory: 184k freed
[ 2.696943] Freeing unused kernel memory: 1444k freed
[ 2.710271] udev[120]: starting version 167
[ 2.732729] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.732753] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.732785] r8169 0000:03:00.0: setting latency timer to 64
[ 2.732825] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
[ 2.733211] r8169 0000:03:00.0: eth0: RTL8168d/8111d at 0xffffc900125fc000, 1c:6f:65:91:c9:21, XID 083000c0 IRQ 43
[ 2.733460] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.733483] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 2.733513] scsi0 : pata_atiixp
[ 2.733611] scsi1 : pata_atiixp
[ 2.734000] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 2.734004] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 2.734309] scsi2 : pata_jmicron
[ 2.735025] scsi3 : pata_jmicron
[ 2.735072] ahci 0000:00:11.0: version 3.0
[ 2.735094] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.735176] ata3: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
[ 2.735180] ata4: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
[ 2.735219] ahci 0000:00:11.0: irq 44 for MSI/MSI-X
[ 2.735315] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 2.735320] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.736205] scsi4 : ahci
[ 2.737039] scsi5 : ahci
[ 2.737126] scsi6 : ahci
[ 2.737177] scsi7 : ahci
[ 2.737246] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 44
[ 2.737250] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 44
[ 2.737255] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 44
[ 2.737259] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 44
[ 2.737325] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.750141] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.750148] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.750154] ahci 0000:05:00.0: setting latency timer to 64
[ 2.750412] scsi8 : ahci
[ 2.750465] scsi9 : ahci
[ 2.750497] ata9: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 17
[ 2.750502] ata10: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 17
[ 2.760130] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 2.920342] ata1.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 2.920349] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 2.960340] ata1.01: configured for UDMA/33
[ 2.969447] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 2.978597] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.978602] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.978691] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.978758] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 2.995081] usbcore: registered new interface driver uas
[ 3.080096] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.080128] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.080155] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.100111] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.280086] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.281240] ata8.00: ATA-8: ST31000520AS, CC32, max UDMA/133
[ 3.281245] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.282576] ata8.00: configured for UDMA/133
[ 3.282675] scsi 7:0:0:0: Direct-Access ATA ST31000520AS CC32 PQ: 0 ANSI: 5
[ 3.282806] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 3.282828] sd 7:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.282933] sd 7:0:0:0: [sda] Write Protect is off
[ 3.282939] sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.282964] sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.293555] sda: sda1
[ 3.293777] sd 7:0:0:0: [sda] Attached SCSI disk
[ 3.300108] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.309983] ata10.00: ATA-8: WDC WD1002FAEX-00Y9A0, 05.01D05, max UDMA/133
[ 3.309988] ata10.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.310035] usb 4-2: new full speed USB device using ohci_hcd and address 2
[ 3.311701] ata10.00: configured for UDMA/133
[ 3.311768] scsi 9:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 3.311891] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 3.311908] sd 9:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.311998] sd 9:0:0:0: [sdb] Write Protect is off
[ 3.312005] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.312029] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.341844] sdb: sdb1 sdb2 < sdb5 >
[ 3.342116] sd 9:0:0:0: [sdb] Attached SCSI disk
[ 3.347098] firewire_ohci 0000:04:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.348315] Initializing USB Mass Storage driver...
[ 3.348422] scsi10 : usb-storage 2-2:1.1
[ 3.348499] usbcore: registered new interface driver usb-storage
[ 3.348502] USB Mass Storage support registered.
[ 3.400169] firewire_ohci: Added fw-ohci device 0000:04:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 3.526354] EXT4-fs (sdb1): INFO: recovery required on readonly filesystem
[ 3.526359] EXT4-fs (sdb1): write access will be enabled during recovery
[ 3.880077] usb 4-5: new full speed USB device using ohci_hcd and address 3
[ 3.900122] firewire_core: created device fw0: GUID 003ae540001c6f65, S400
[ 4.366395] scsi 10:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 4.381885] scsi 10:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 4.397382] scsi 10:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 4.412879] scsi 10:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 4.413249] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 4.413382] sd 10:0:0:1: Attached scsi generic sg4 type 0
[ 4.413480] sd 10:0:0:2: Attached scsi generic sg5 type 0
[ 4.413670] sd 10:0:0:3: Attached scsi generic sg6 type 0
[ 4.421522] sd 10:0:0:1: [sdd] Attached SCSI removable disk
[ 4.430494] sd 10:0:0:2: [sde] Attached SCSI removable disk
[ 4.431491] sd 10:0:0:0: [sdc] Attached SCSI removable disk
[ 4.432497] sd 10:0:0:3: [sdf] Attached SCSI removable disk
[ 4.580088] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 4.830106] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2
[ 4.830175] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:13.0-1/input0
[ 4.834430] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/input/input3
[ 4.834539] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:13.0-1/input1
[ 4.834555] usbcore: registered new interface driver usbhid
[ 4.834557] usbhid: USB HID core driver
[ 6.537613] EXT4-fs (sdb1): orphan cleanup on readonly fs
[ 6.537623] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 18481163
[ 6.537641] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 18481162
[ 6.537645] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 18481161
[ 6.537649] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 18481160
[ 6.537653] EXT4-fs (sdb1): ext4_orphan_cleanup: deleting unreferenced inode 18481159
[ 6.537656] EXT4-fs (sdb1): 5 orphan inodes deleted
[ 6.537658] EXT4-fs (sdb1): recovery complete
[ 7.617705] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 16.802641] udev[419]: starting version 167
[ 16.809574] lp: driver loaded but no devices found
[ 16.813591] it87: Found IT8720F chip at 0x228, revision 8
[ 16.813608] it87: Routing internal VCCH to in7
[ 16.813612] it87: Beeping is supported
[ 16.824451] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.824483] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 16.824486] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 16.824611] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[ 16.825410] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 16.825414] Disabling lock debugging due to kernel taint
[ 16.843632] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 16.843634] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.844557] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 16.844619] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 16.860194] Adding 36119548k swap on /dev/sdb5. Priority:-1 extents:1 across:36119548k
[ 16.860262] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfdbfe000
[ 16.860331] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 16.860337] xhci_hcd 0000:02:00.0: irq 46 for MSI/MSI-X
[ 16.860341] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
[ 16.860344] xhci_hcd 0000:02:00.0: irq 48 for MSI/MSI-X
[ 16.860348] xhci_hcd 0000:02:00.0: irq 49 for MSI/MSI-X
[ 16.860351] xhci_hcd 0000:02:00.0: irq 50 for MSI/MSI-X
[ 16.860354] xhci_hcd 0000:02:00.0: irq 51 for MSI/MSI-X
[ 16.863600] usb usb8: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 16.863728] xHCI xhci_add_endpoint called for root hub
[ 16.863730] xHCI xhci_check_bandwidth called for root hub
[ 16.863773] hub 8-0:1.0: USB hub found
[ 16.863777] hub 8-0:1.0: 4 ports detected
[ 16.880121] MCE: In-kernel MCE decoding enabled.
[ 16.882958] EDAC MC: Ver: 2.1.0 Apr 11 2011
[ 16.891410] [fglrx] Maximum main memory to use for locked dma buffers: 11735 MBytes.
[ 16.893436] [fglrx] vendor: 1002 device: 68d9 count: 1
[ 16.893788] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 16.893800] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.893805] pci 0000:01:00.0: setting latency timer to 64
[ 16.894087] [fglrx] Kernel PAT support is enabled
[ 16.894103] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[ 16.912258] EDAC amd64_edac: v3.3.0
[ 16.913020] EDAC amd64: DRAM ECC disabled.
[ 16.913027] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.913028] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.913029] (Note that use of the override may cause unknown side effects.)
[ 16.918571] Bluetooth: Core ver 2.15
[ 16.918598] NET: Registered protocol family 31
[ 16.918600] Bluetooth: HCI device and connection manager initialized
[ 16.918602] Bluetooth: HCI socket layer initialized
[ 16.920766] type=1400 audit(1306865315.723:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=671 comm="apparmor_parser"
[ 16.921013] type=1400 audit(1306865315.723:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser"
[ 16.921166] type=1400 audit(1306865315.723:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser"
[ 16.922062] type=1400 audit(1306865315.723:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=771 comm="apparmor_parser"
[ 16.922305] type=1400 audit(1306865315.723:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=771 comm="apparmor_parser"
[ 16.922458] type=1400 audit(1306865315.723:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=771 comm="apparmor_parser"
[ 16.922856] type=1400 audit(1306865315.723:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=780 comm="apparmor_parser"
[ 16.924098] type=1400 audit(1306865315.723:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=782 comm="apparmor_parser"
[ 16.928931] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 16.929721] usbcore: registered new interface driver btusb
[ 16.973525] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.076084] hda_codec: ALC892: BIOS auto-probing.
[ 17.086307] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 17.086488] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 17.086557] HDA Intel 0000:01:00.1: irq 52 for MSI/MSI-X
[ 17.086577] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 17.180081] usb 8-4: new full speed USB device using xhci_hcd and address 2
[ 17.182570] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 17.215685] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 17.220669] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 17.224626] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 17.229681] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 17.278617] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 17.279730] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x327E
[ 17.279743] usbcore: registered new interface driver usblp
[ 17.288560] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90014c80000, using 5824k, total 5824k
[ 17.288563] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 17.288565] vesafb: scrolling: redraw
[ 17.288567] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 17.288706] Console: switching to colour frame buffer device 175x65
[ 17.303612] fb0: VESA VGA frame buffer device
[ 19.038305] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.094705] type=1400 audit(1306865317.893:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=1068 comm="apparmor_parser"
[ 19.094753] type=1400 audit(1306865317.893:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1064 comm="apparmor_parser"
[ 19.118731] ppdev: user-space parallel port driver
[ 19.257116] r8169 0000:03:00.0: eth0: link down
[ 19.257146] r8169 0000:03:00.0: eth0: link down
[ 19.258325] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.661971] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 19.661986] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 19.664516] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 19.665020] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 19.726177] fglrx_pci 0000:01:00.0: irq 53 for MSI/MSI-X
[ 19.726617] [fglrx] Firegl kernel thread PID: 1450
[ 19.726651] [fglrx] Firegl kernel thread PID: 1451
[ 19.726685] [fglrx] Firegl kernel thread PID: 1452
[ 19.726892] [fglrx] IRQ 53 Enabled
[ 19.877542] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 19.877936] [fglrx] Gart USWC size:1280 M.
[ 19.877939] [fglrx] Gart cacheable size:508 M.
[ 19.877942] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.877944] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 19.877945] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 20.164610] vboxdrv: Found 6 processor cores.
[ 20.164830] vboxdrv: fAsync=0 offMin=0x507 offMax=0x484c
[ 20.164874] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.164875] vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[ 20.207796] Bluetooth: L2CAP ver 2.15
[ 20.207798] Bluetooth: L2CAP socket layer initialized
[ 20.212701] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.212703] Bluetooth: BNEP filters: protocol multicast
[ 20.215333] Bluetooth: SCO (Voice Link) ver 0.6
[ 20.215335] Bluetooth: SCO socket layer initialized
[ 20.891853] r8169 0000:03:00.0: eth0: link up
[ 20.893057] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.392735] usb 8-4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 21.398594] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 23.725487] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.727425] EXT4-fs (sda1): re-mounted. Opts: commit=0
[ 24.275340] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.883361] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 31.560029] eth0: no IPv6 routers present